MATERIAL HANDLING SYSTEM (TRANSPORT WAGON) TO CONTROL UP & DOWN MOVEMENT: 1 No. of Automatic Transporter: Gantry type automatic hoist crane with the following technical characteristics Fabrication: MS Structural steel fabrication with two coats of acid proof epoxy paint. The Transporter will be steady and travel with load without any vibration / jerk (smooth movement should be ensured).

Safe working load: Minimum 100 kgs to 3000 kgs

Distance between rails: 500mm to 8000 mm

Lifting rate: 2.5 - 10 meters per minute.

Sliding rate: 8 - 25 meters per minute.

Installed power: 5 HP to 25 hp Geared brake motor (min) for traverse and 35 HP Geared brake motor for lift. Make: SIEMENS/BHARAT BIJILI / CROMPTON GREAVES / REMI / MGM-VARVEL / BONFIGLIOLI / SEW EURODRIVE Feed Voltage: 3 PH, 415V AC , 50Hz Control voltage : 24V AC, 50 Hz T

The gantry crane will also include the following:

The wagon will travel from station Load Station to station Hot Air Dryer and Vice versa. Electric feeding and control panel with Control push-buttons for manual operations and auto change over switch: 1 No.

Transporter system will have proximity switches to control UP/DOWN movement, an electric Pendent push button switches with work indication e.g. UP, DOWN. For manual operation should be provided.

The system will be interfaced with PLC for all the aforesaid movements in automatic fashion. Transport Wagon is of portal type pull cord with emergency stop with gear box motor for traverse and hoist motions.

Transporter is designed with provision to carry the process tank from its position to Loading / Unloading point for repair or replacement of the tank. AUTO/MANUAL / SERVICE MODES is provided in PLC PROGRAM.